基于51单片机的节能型光伏追日系统的设计

目前存在的光伏追日系统在控制方式上都存在同样的问题:追日步进电机时刻运行,从未停歇,存在浪费用电和机械疲劳运行等问题。文章主要介绍以51单片机为控制核心,结合光控与时控的优点,并在此基础上提出适时进入节能的睡眠模式,最大程度地减少追日系统能耗的控制方法。实测结果表明,该算法具有减少系统耗电、减少机械传动系统损伤等优点。     

Synthesis,Corrosion and Bioactivity Evaluation of Gelatin/Silicon and Magnesium Co-Doped Fluorapatite Nanocomposite Coating Applied on AZ31 Mg Alloy

In this study, a nano-composite composed of gelatin as the matrix and Si-Mg-FA nano-particles as an additive was deposited on the AZ31 Mg alloy via dip coating method. In addition, a coating composed of MgO, MgSiO₃ and Mg₂SiO₄ phases was applied on the AZ31 Mg alloy by anodizing process. It was found that the Nano-composite coating with a uniform distribution of nano-particles within the gelatin matrix with the thickness of about 9 µm was dense, crack-free and uniform whereas the surface of anodized layer was relatively coarse due to the presence of flaws and micro-cracks. The surface morphology, EDS analysis and FTIR results revealed the ability of nano-composite coated specimen to form the bone-like apatite. Due to the presence of aforementioned phases and special surface features, the anodized specimen possessed higher and lower corrosion resistance than uncoated and nano-composite coated specimens, respectively. The passive coating resistances (R_CT) of nano-composite, anodized specimen and uncoated samples were 2164, 1449 and 1024 Ω cm², respectively.     

Medium-entropy (Ti,Zr, Hf)2SC MAX phase

Medium- and high-entropy alloys or ceramics for tuning the physicochemical properties of materials by the combination of multiple principal elements have received much interest. Herein, a medium-entropy (Ti, Zr, Hf)₂SC phase was synthesized attributing to the structural and chemical diversity of MAX phases. The crystal structure of (Ti, Zr, Hf)₂SC was determined by the Rietveld refinement of XRD, SEM, and atom-resolved TEM along with EDS elemental analysis. Phase evolution of X-ray diffraction patterns and TG/DSC curves were employed to reveal the synthesis mechanism of (Ti, Zr, Hf)₂SC from 2TiC–Zr–ZrC-2HfH₂-3.2FeS reactant system. The Vicker's hardness and the electrical resistivity of (Ti, Zr, Hf)₂SC were found higher than those of Ti₂SC, but the thermal conductivity of (Ti, Zr, Hf)₂SC was lower.     

Synthesis and characterization of poly(ethylene tetrasulfide)/graphene oxide nanocomposites by in situ polymerization method

Poly(ethylene tetrasulfide) (PSP) is synthesized via interfacial polycondensation of 1,2 dichloroethane and sodium tetrasulfide, in the presence of graphene oxide (GO). This process resulted in homogeneously dispersed PSP/GO nanocomposites. Nanocomposites of 0.3 and 0.5?wt% of GO are synthesized and their morphology, chemical characteristics behavior are studied employing field emission scanning electron microscopy, Fourier transform infrared spectroscopy and X-ray diffraction techniques. Thermal characterization of composites is performed by differential scanning calorimetry and thermogravimetry analysis. Results indicate that the addition of only small amounts (0.5?wt%) of well-dispersed GO can increase the melting point more than 16°C resulting in better thermal properties for the composite. The solubility of nanocomposite is also studied and results show that the solubility depends on solvent concentration in addition to reinforcement (GO) deals.     

Sketch-based data plane hardware model for software-defined measurement

A sketch-based data plane hardware model for software-defined measurement was introduced,and it was implemented in the programmable network device NetMagic.A generic sketch model for collecting flow-level data using high-speed memories on the FPGA was proposed,the control plane collected and cached the data for further process.Count-min sketch and 2-universal hash functions in the SRAM of FPGA for real-time traffic counting of high-speed traffic were implemented; Bloom filter was used to rebuild the original 5-tuple data which solved the irreversibility of sketch.The CERNET backbone trace to evaluate the prototype system was used,the result shows that it has the ability to use the limited hardware resource to measure a large amount of network traffic data with a proper measurement accuracy at the same time.     

Current and Temperature Dependent Matching Fields in Nb Film of Rectangular Array of Holes

Nanoengineered periodic array of holes on superconducting thin films have a great interest due to their excellence for the studies of the vortex pinning mechanisms in the type-II superconductors. Rectangular array of holes has been fabricated over a microbridge of Nb superconducting thin film by e-beam lithography. Rectangular array of holes have two type of scenario, at low magnetic fields matching effects are sharp and narrow while at high fields wide and shallower. In this work, we study the matching pinning effect by the artificial hole array in superconducting Nb thin films. We observed that as the inter distance between holes is decreased; the sharp matching effects become dominant and vice versa.     

Effect of Shot Peening Operation on the Microstructure and Wear Behavior of AZ31 Magnesium Alloy

Protection of Metals and Physical Chemistry of Surfaces - Shot peening is a treatment used to increase surface hardness and wear resistance. In this study, the effect of shot peening on the...     

Synthesis of Ion Imprinted Polymers by Copolymerization of Zn(II) and Al(III)8-hydroxy Quinolone Complexes with Divinylbenzene and Methacryclic Acid

In this research work, Zinc(II) and Aluminum(III)-IIP's were synthesized by optimizing the amount of methacrylic acid as monomer, divinylbenzene as cross-linker. The IIP's were functionalized with 8-hydroxy quinolone complexes of the two metal ions under thermal conditions by copolymerization with monomer and cross-linker. The IIP's and Non-IIP's were characterized using FT-IR, TGA, and SEM analysis. A quite remarkable difference in the size was observed of the polymers (Zn(II) 1.0 µm and Al(III) 0.1 µm). A stronger affinity was observed with IIP in comparison with Non-IIP at pH 3.1 and 4.5 for Zn(II) and Al(III) ions on their respective polymers.     

基于稳定固溶体团簇模型的无扩散阻挡Cu合金薄膜的成分设计

随着超大规模集成电路的发展,器件特征尺寸不断缩小,必然会出现Cu互连扩散阻挡层厚度无法进一步减小等瓶颈问题。因此,开发新型无扩散阻挡层Cu合金薄膜(Cu种籽层)势在必行。该新型互连结构在长时间的中高温(400~500℃)后续工艺实施过程中,需同时具备高的稳定性(不发生互扩散反应)和低的电阻率。基于此,首先综述了目前无扩散阻挡层结构的研究现状及问题,然后对基于稳定固溶体团簇模型设计制备的无扩散阻挡Cu-Ni-M薄膜的研究工作进行了梳理,通过多系列薄膜微观结构、电阻率及稳定性的对比,深入探讨了第三组元M的选择原则及其对薄膜热稳定性的影响。为进一步验证稳定固溶体团簇模型的有效性,对第二组元的变化进行了相关讨论。结果证实,选取原子半径略大于Cu、难扩散且难溶的元素作为第三组元M,薄膜表现出良好的扩散阻挡能力;当M/Ni=1/12,即合金元素完全以团簇形式固溶于Cu基体时,薄膜综合性能达到最优,能够满足微电子行业的要求。所有研究表明,稳定固溶体团簇模型在无扩散阻挡层Cu合金薄膜的成分设计方面十分有效,该模型也有望在耐高温Cu合金及抗辐照材料成分设计方面推广使用。